Standard Size in 2.0 x 1.6 x 0.47 inches Nickel-Coated Copper with Non-Conductive Base, Six-side shielded Operating Temperature: -25~70 degrees 2:1 Input Range High Efficiency Up To 86% Screw Terminal For Optional
download SPC.
Specification
1.All specificationsvalid at nominal input voltage,full load and +25°Cafter warm-up time unless otherwise stated. 2.Measured with 0.1U 50V // 47U 50V Ceramic Cap. Cross to output
Input Specification
Characteristics
Conditions
Voltage Range
2:1 Range:
36 ~ 75 VDC
Filter
type
Output Specification
Characteristics
Conditions
Output Power
40 Watt （max.）
Voltage Accuracy （Full Load and Nominal Vin）
Single:
±2%
Minimum Load （at Full Load）
Line Regulation （LL to HL at Full Load）
Single:
±0.5%
（typ.）
Load Regulation （1 to at Full Load）
Single:
±1%
（typ.）
Ripple （20MHz bandwidth）
1.8S~3.3S:50mV （Vp-p）
（max.）
5S~24S:1% Vout
Noise （20MHz bandwidth）
1.8S~3.3S:100mV （Vp-p）
（max.）
5S~24S:1% Vout
Temperature Coefficient
±0.02% / °C （max.）
Short Circuit Protection
Hiccup mode, Auto-recovery
General Specification
Characteristics
Conditions
Switching Frequency
400K Hz （typ.）
Isolation Voltage （Input to Output）
1600 VDC （min.）
Operating Temperature
-25 °C to +70°C （40°C full load with 18 CFM Air Flow）
Storage Temperature
-55°C to +105°C
Humidity
95% RH （max.）
Cooling
Free air convection
Physical Specification
Characteristics
Conditions
Dimension （Tolerance ±0.5）
50.8 x 40.6 x 11.9 mm
2.0 x 1.6 x 0.47 inches
Weight
58 g
Case Material
Nickel-Coated Copper with Non-Conductive Base, Six-side shielded
發(fā)郵件給我們：sales1@haonpower.com
type