Standard Size in 1.97 x 1.0 x 0.425 inches Five-side shielded Aluminum with Non-Conductive base, Black Anodize Operating Temperature: -25~70 degrees 2:1 Input Range Low Cost but High Reliability Regulated Output Low Ripple and Noise Remote ON/OFF Control （Optional）
download SPC.
Specification
1.All specificationsvalid at nominal input voltage,full load and +25°Cafter warm-up time unless otherwise stated. 2.Measured with 0.1U 50V // 47U 50V Ceramic Cap. Cross to output
Input Specification
Characteristics
Conditions
Voltage Range
2:1 Range:
9 ~ 18 VDC 18 ~ 36 VDC 36 ~ 75 VDC
Filter
type
Output Specification
Characteristics
Conditions
Output Power
15 Watt （max.）
Voltage Accuracy （Full Load and Nominal Vin）
Single:
±2%
Dual:
±2%
Minimum Load （at Full Load）
to 3%
Line Regulation （LL to HL at Full Load）
Single:
±0.5%
（typ.）
Dual:
±0.5%
Load Regulation （1 to at Full Load）
Single:
±1%
（typ.）
Dual:
±1%
Ripple （20MHz bandwidth）
<0.2% Vout+40mV
（max.）
Noise （20MHz bandwidth）
<0.5% Vout+50mV
（max.）
Temperature Coefficient
±0.02% / °C （max.）
Short Circuit Protection
Current limit, Auto-recovery
General Specification
Characteristics
Conditions
Switching Frequency
300K Hz （typ.）
Isolation Voltage （Input to Output）
1600 VDC （min.）
Operating Temperature
-25°C to +70°C （with derating）
Storage Temperature
-55°C to +105°C
Humidity
95% RH （max.）
Cooling
Free air convection
Physical Specification
Characteristics
Conditions
Dimension （Tolerance ±0.5）
50.1 x 25.4 x 10.8 mm
1.97 x 1.0 x 0.425 inches
Weight
32 g
Case Material
Five-side shielded Aluminum with Non-Conductive base, Black Anodize
發(fā)郵件給我們：sales1@haonpower.com